Toolpath export to dxf

by prashant (Posted Tue, 03 May 2016 10:10:48 GMT)

Hi Peter,

There is a existing post processor available in ArtCAM which can be used to output the NC code as a DXF file.

While saving the NC output please use Machine file format : Laser DXF (*.dxf) as shown in the video link below;

http://screencast.com/t/mFbtqGFdDuc

Also see the attached image 'NC_code_DXF_output.png'

Thank you.

Best regards,
Prashant

Read Main Topic

---